Self Powered Engine Driven DC Welder Cum Generator

D C WELDING

Model

HPW – 7000 D

Special Highlights & Applications

· World’s Most Professional Diesel Portable,& High Power Arc Welding Machine Suitable for High Class, All type Weldings Including Structural Welding Rods 7018 Size 4mm Electrode & other Hard Facing Electrodes.

· Most suitable for Big Diameter Pipe Line welding.

Maximum Output (Duty Cycle 60%)

225 Amps.

Maximum Output (Duty Cycle 100%)

200 Amps.

Working Voltage

20v to 35 v

Open Circuit Voltage

65 Volt (Minimum)

Current Regulation Amps

*60-225

Rectifying Mode

SCR, Phase Controlled 3-phase, Rectifying Bridge
Twin SCR Block

Electrode diameter

2.6 mm to 4.0 mm (E 7018)

Alternator Type

Multiphase, Brush less with Rear Earth Magnet Rotor

ENGINE

Model

TP186F

Type

4-Stroke, OHV, Vertical, Single Cylinder, Direct Injection

Maximum Power

10HP

Bore x Stroke

86x72mm

D C WELDING

Model

GE 3P W 8000 D

Special Highlights & Applications

·         Diesel Portable Arc Welder Cum Generator Machine Suitable for All types of General Purpose Structural Welding, Light, & Medium Welding Jobs, up to 4 mm Electrode

·         In built AC 230 volt – 50 Hz, 3 KVA – Single Phase.

·         In Built AC 415 Volt – 50 Hz, 5 KVA- 3 Phase

·         Can run all AC Appliance including 3 Phase Motors. 

DC Welding Output (Duty Cycle 60%)

200 Amps.

Working Voltage

20 v to 35 v

Open Circuit Voltage (OCV)

65 Volt (Minimum)

Current Regulation

75-200 Amps.

Rectifying Mode

SCR, Phase Controlled 3-phase, Rectifying Bridge

Maximum Electrode Diameter

2.6 mm to 4.0 mm

AC Generator

Alternator Type

Brush less with Rear Earth Magnet Rotor.

AC Output (3-Phase)

5000 VA

AC. Voltage (3-Phase)

415 Volts ± 10 Volts, Three Phase

Rated AC  Current Per Phase

6.4 Amps. Each Phase

Circuit Breaker (3-Phase)

6.5 Amps. Each Phase

 AC Output (Single Phase)

3000 VA

Single Phase  AC Voltage (No Load)

240 Volts ± 10 V, Single Phase

Single Phase  AC Voltage (at Load)

220 Volts ± 10 V, Single Phase

Rated Current (Single Phase)

12 Amps.

Circuit Breaker (Single Phase)

12 Amps.

Frequency

50 to 60 Hz.

Class of Insulation

F

D C WELDING

MODEL

GE W 8000D

Special Highlights & Applications

·        High Power Diesel Portable Arc Welder Cum Generator Machine Suitable for All types of General Purpose Structural Welding, Light, & Heavy Welding Jobs, up to 5 mm Electrode

·        In built AC 230 volt – 50 Hz, 5 KVA for AC Appliances

·        Low Running Cost due to Diesel Engine.

WeldingOutput Current (Duty Cycle 60%)

250Amps.

WeldingOutput Current (Duty Cycle 100%)

200Amps.

WorkingVoltage

20Vto35V

OpenCircuit Voltage (OCV)

65 Volt (Minimum)

Welding CurrentRegulation (Amps)

75 – 250 AMPS

RectifyingMode

SCR,PhaseControlled3-phase,RectifyingBridge

MaximumElectrodediameter

2.6mmto 5.0mm

A C GENERATOR

Alternator Type

BrushlesswithRearEarthMagnetRotor.

Maximum Ac Output

5000VA

Rated Output Current

17.4 Amps.

NFB Amps

18Amps.

AC. Voltageat No Load

240Volts±10 Volts,SinglePhase

AC. Voltageat Rated Load

220Volts±10 Volts,SinglePhase

Frequency (Adjustable)

50to60Hz.

Classof Insulation

F

ENGINE

Model

HM192F

D C WELDING

MODEL

HPW – 350 Diesel - AC

Special Highlights & Applications

·         Extreme Diesel Portable Welding Machine Cum Generator, Suitable for High Quality & All types of Welding, Including Structural Welding Rods 7018 Size 5 mm Electrode & hard facing Rods.

·         Most suitable for Big Diameter Pipe Line welding, Railway jobs

Maximum Output (Duty Cycle 60%)

325 Amps.

Maximum Output (Duty Cycle 100%)

275 Amps.

Working Voltage

20v to 39 v

Open Circuit Voltage

80 Volt (Minimum)

Current Regulation Amps

*60-325

Rectifying Mode

SCR, Phase Controlled 3-phase, Rectifying Bridge
Twin SCR Block

 Electrode diameter

3 mm to 6.0 mm

Alternator Type

Multiphase, Brush less with Rear Earth Magnet Rotor

A C GENERATOR

Maximum Ac Output

5000VA

Rated Output Current

17.4 Amps.

NFB Amps

18Amps.

AC. Voltageat No Load

240Volts±10 Volts,SinglePhase

AC. Voltageat Rated Load

220Volts±10 Volts,SinglePhase

Frequency (Adjustable)

50to60Hz.

Alternator Type

Brushless, Rare Earth Magnetic Rotor,

THD ≤ 5 %, Pure Sine Wave.

D C WELDING

Model

GE-W 5000 D

Special Highlights &Applications

·         Most Portable & Low Cost Arc Welding Machine Suitable for General Purpose Structural Welding, Light and medium Welding Jobs, up to 3.2 mm Electrode.

·         In built AC 230 volt – 50 Hz, 2 KVA for AC Appliances.

·         Lowest Running Cost due to Small Diesel Engine, Consumes only 0.5Ltr. Diesel per Hour

Maximum Output (Duty Cycle 60%)

150 Amps.

Maximum Output (Duty Cycle 100%)

140 Amps.

Working Voltage

18v to 28 v

Open Circuit Voltage

50 Volt (Maximum)

Current Regulation Amps

*50-150 Amps.

Rectifying Mode

SCR, Phase Controlled 3-phase,
Rectifying Bridge

Maximum Electrode diameter

2.6 mm to 3.2 mm

AC GENERATOR

Alternator Type

Brush less with Rear Earth Magnet Rotor.

Maximum Power (VA)

2000 VA

Rated Power (VA)

1800VA

Rated Current

7.5 Amps.

NFB Amps

7.5 Amps.

AC. Output Voltage

220 Volts ±  8%  Volts, Single Phase – 50 Hz

Frequency (Adjustable)

50to60Hz.

Class of Insulation

F

Engine

Model

TP170FA

Type

4-Stroke, OHV, Single Cylinder, Direct Injection, Swirl Chamber, Inclined type

Maximum Power

4.46 Kw @ 3600 Rpm